Our Steam Range

Management of you steam room is made simple with a Helo control panel

Control Panels


The M2 control panel is surface mounted either inside or outside the steam room. A built-in temperature sensor is activated when internally mounted or an extra temperature sensor is required for the external mounting option.

The operating time can be programmed to run up to 23 hours and for temperatures in the range of 25-50°C. There’s also a 2 step temperature control for even steam feed.

  • Size: 180 x 55 x 8mm
  • Connection cable 5 metres

Push Button

The push button is a simple control option that runs the HNS M2 steam generator for 30 minutes every time the button is pressed.

The push button can also be used to stop the steam flow within the 30 minute time cycle. With the Push button no thermostat sensor is used due to the restricted time limits.

Using the push button with the HNS T1 steam generator allows the unit to be switched On/Off with the T1 regulating the temperature and maximum run time settings.


The T1 has a new design with glass front and touch control. The control panel is mounted outside the steam room. The display shows time, temperature and On/Off, with settings for preset time, on-time and temperature.

  • LCD display with sleep function and proximity sensor
  • External temperature sensor
  • Automatic cleaning programme
  • Multi lingual interface
  • Displays Celcius/Fahrenheit and 12/24 hour time format
  • Service Reminder
  • Size: 140 x 80 x 20mm